ZCZG/ZCZH high temperature and high pressure solenoid valve

ZCZG/ZCZH high temperature and high pressure solenoid valve
  • sell：021-32051999
  • sell：021-32050777
  • fax：021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

ZCZG/ZCZH high-temperature and high-pressure solenoid valve is a pilot direct-acting solenoid valve. It can be used in water, light oil, heavy oil, non-corrosive gas and steam respectively. For example, in the drainage system of pumping pipe and the exhaust system of evaporator in power station, the medium in the pipeline can be adjusted automatically and controlled automatically by two positions. Remote control.

Structural characteristics

High temperature resistance: metal hard seal is used to improve the service temperature. Medium fluid temperature can reach 425 degrees centigrade.

Wear resistance: material selection is reasonable. Valve cup and guide sleeve make use of the lubrication of the fluid skillfully to reduce wear.

Using the lever principle to ensure the complete isolation of the coil and valve body.

Structure principle

When the solenoid valve is electrified, the connecting rod is raised, the rotating shaft is driven to rotate, and the secondary valve is opened. Since the vice valve is opened,

The pressure fluid in the upper part of the main valve cup is discharged, so the pressure in the lower part of the main valve cup is higher than that in the upper part, so the pressure in the lower part pushes the main valve cup upward. After the main valve is opened, the upper and lower pressures are equal. The valve cup is placed in a balanced state under the action of electromagnetic force and upper and lower pressures, and the valve is opened. When the power is cut off, the auxiliary valve is closed under the action of the armature weight and return spring. After the auxiliary valve is closed, the pressure on the upper part of the main valve cup rises and the main valve cup is pressed down to achieve the sealing effect of flow cut off and the valve is closed.

Model description

technical parameter


介質(zhì)溫度℃
ZCZG
≤250
ZCZH
≤400
公稱壓力（MPa）
ZCZG
2.5
ZCZH
4.0
工作壓差（MPa）
ZCZG
0.1-2.5
ZCZH
0.1-4.0
公稱通徑（MPa）
15
20
25
32
40
50
65
80
100
功耗
130VA
480VA
電源電壓
AC220V DC 24V 其余規(guī)格可作特殊訂貨
額定流量系數(shù)（KV）
3.8
7.4
10.3
18.8
25.7
41
58
85
154
泄漏量（ml/min）
按JB/T7352-94·F規(guī)定


Installation size


DN
L
H
D
D1
D2
D3
b
f1
f
n-d
10
160
298
90
60
34
41
16
4
2
4-?14
15
160
298
95
65
39
45
16
4
2
4-?14
20
200
304
105
75
50
55
16
4
2
4-?14
25
200
304
115
85
57
65
16
4
2
4-?14
32
200
314
140
100
65
78
18
4
2
4-?18
40
260
460
150
110
75
85
18
4
3
4-?18
50
300
460
165
125
87
100
20
4
3
4-?18
65
290
433
185
145
109
120
22
4
3
8-?18
80
310
433
200
160
120
135
22
4
3
8-?18
100
350
461
235
190
149
160
24
4.5
3
8-?22


The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards：

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service：

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service：

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service：

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.：

a、Structure length；

b、Connection Type；

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range；

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process：

1、Customer purchase list fax to021-33872143，Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google：

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.：

a、Structure length；

b、Connection Type；

c、Nominal diameter, full diameter, reduced diameter, pipe size；

d、Operating medium and temperature, pressure range；

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time.， The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service：

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service：

1、"Qigao" product quality period is from the factory12Month, practice“Three packs”Service (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.，
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.ZCZG/ZCZH high temperature and high pressure solenoid valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!