CS16/S46H bellows type steam trap valve

CS16/S46H bellows type steam trap valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

CS16H and CS46H diaphragm box steam traps (steam pressure balance type) are the most commonly used advanced energy-saving traps in the world. The reaction of the diaphragm box steam trap is very sensitive. There is high temperature condensate water in front of the valve, no steam leakage, and the energy saving effect is remarkable.


The advantages of the diaphragm box steam trap are: automatic air exhaust, small size, no fear of freezing, can be installed at any position; easy maintenance, can be checked in the pipeline repair and replacement parts; the maximum back pressure rate is less than 80%, the diaphragm box is strong, long service life. Membrane box steam trap is suitable for steam main line, steam heat tracing pipe network, instrument heat tracing and steam drainage of small heating equipment.


Working principle


The main action element of the diaphragm box steam trap is a metal diaphragm box filled with a liquid whose gasification temperature is lower than the saturation temperature of water. When the device starts just in time, there is low temperature condensate in the pipeline, and the liquid in the membrane box is in condensation state. The valve is in the open position. When the condensate temperature rises gradually, the liquid in the diaphragm box begins to evaporate, the pressure in the diaphragm box rises, and the diaphragm drives the valve to move toward the closing direction. Before the condensate reaches the saturated temperature, the trap closes completely, and the diaphragm box controls the valve switch with the change of the steam temperature to prevent the steam from draining. There are two kinds of cartridge boxes with open valve temperature below 15 and 30 degrees at saturation temperature.


Structural characteristics


1. Excellent air exhausting ability. It can withstand overheated steam and water hammer.


2, in the pressure range is a fixed supercooling cycle operation.


3, the valve inside the membrane box, there are single group, two groups, many groups. It is suitable for large displacement occasions.


4, temperature sensor, corrosion resistance is strong, so that the valve life expectancy.


5. This piece has two kinds of carbon steel and stainless steel, small and light weight, vertical installation effect is the best, can also be installed at any angle.


Material of main parts

部件名稱
材料
閥體閥蓋
WCB
膜盒
1Cr18Ni9Ti
膜片
哈氏合金
閥座
3Cr13
過濾網
1Cr18Ni9Ti
Main dimensions


產品型號
口徑
連接方式
適用壓力
MAX允許溫度
閥體材質
外形尺寸
L
H1
H2
W
CS16H-16C
15-20
內螺紋
0.01-1.6
250
100
100
58
55
70
25
內螺紋
0.01-1.6
250
120
120
58
55
70
32-40
內螺紋
0.01-1.6
250
150
150
68
68
90
50
內螺紋
0.01-1.6
250
160
160
68
68
90
CS46H-16C
15-20
法蘭
0.01-1.6
250
150
150
55
55
70
25
法蘭
0.01-1.6
250
160
160
55
55
70
32-50
法蘭
0.01-1.6
250
210
210
85
60
120


The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.CS16/S46H bellows type steam trap valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!