ZJHPF46 pneumatic diaphragm fluorine regulating valve

ZJHPF46 pneumatic diaphragm fluorine regulating valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

ZJHPF46 pneumatic membrane lined tetrafluoroethylene (F46) single-seat control valve is a corrosion-resistant through single-seat control valve. The valve body wall and the valve inner components in contact with the fluid are all made of high-pressure injection molding technology, lined with corrosion-resistant and aging-resistant polyethylene fluoride (F46), and sealed by PTFE bellows. It is widely applied to the control of acid, alkali and other strong corrosive media and toxic and volatile gases and liquids.


Characteristic


1, corrosion resistance. It is almost capable of corrosion of all media, including concentrated nitric acid and aqua regia.


2, good sealing performance. The bellows and packing are double sealed to ensure no leakage.


3, small leakage. Because the valve core and valve seat adopt soft seal, ensure no leakage.


4, equipped with HA actuators, large output and compact structure.


The product conforms to GB/T4213-92.


valve body


Type: straight through single seat ball valve.


Nominal diameter: 3/4 ", 20, 25, 32, 40, 50, 65, 80, 100, 150mm


Nominal pressure: PN1.6MPa


Flange standard: JB/T79 1~79 ? 2-94 etc.


Material: ZG230-450 lining F46


Working temperature: -40 ~ 180 C


Gland type: bolt compression type.


Packing: V PTFE packing


Valve inner assembly


Spool type: single seat plunger spool


Flow characteristics: linear characteristics and equal percentage characteristics


Valve seat and spool material: 2Cr13 lining F46


Bellows material: PTFE


Executive Agency


Type: ZHA (B) multi spring film actuator


Diaphragm material: ethylene propylene rubber, nylon cloth, NBR nylon fabric.


Spring range: 20~100, 80 ~ 240kPa


Air supply pressure: 140 ~ 400kPa


Air source interface: Rc1/4 "


Ambient temperature: -30 ~ +70 C


Type of valve action: positive or reverse actuators are used to realize valve closing or gas opening.


Accessories: positioner, air filter pressure reducer, retaining valve, stroke switch, valve position conveyor, solenoid valve, handwheel mechanism, etc.


Actuator configuration


型號
ZHA-22
ZHB-22
ZHA-23
ZHB-23
ZHB-34
ZHB-34
ZHA-45
ZHB-45
you效面積cm2
350
350
560
900
行程mm
16
25
40
60
彈簧范圍KPa
20~100(標準):40~200;
80~240; 20~60; 60~100


Allowable pressure difference
供氣壓力
彈簧范圍
允許壓差
公稱通徑
G3/4"
20
25
32
40
50
65
80
100

1.4
0.2~1.0
16
16
8
5
5
3
2.5
2
1.2

4.0
0.8~2.4
16
16
16
12
11
7
6.5
4.5
2.8

performance


Leakage: less than 0.01% of the rated capacity of the valve.


Return deviation: with locator: less than 1% of the total stroke.


Basic error: positioner: + 1% less than full stroke.


Note: Standard V PTFE packing is adopted.


Adjustable range 30:1


Kv value and stroke


公稱通徑
G3/4"
20
25
32
40
50
65
80
100
150
閥座直徑
3
4
5
6
7
8
10
12
15
20
26
32
40
50
65
80
100
150
Kv值
0.08
0.12
0.20
0.32
0.50
0.80
1.2
2.0
3.2
5.0
8
12
20
32
50
70
100
240
額定行程
10
16
25
40
60


Flow characteristic curve


1. Equal percentage characteristics


2, linear characteristics

Shape size


公稱通徑
G3/4"
20
25
32
40
50
65
80
100
150
L
116
180
185
200
220
250
275
300
350
480
A
267
267
267
267
267
267
350
350
350
470
H
401
445
485
495
523
532
697
699
699
817
H1
50
65
70
80
71
88
102
140
170
190


The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.ZJHPF46 pneumatic diaphragm fluorine regulating valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!