ZAZ (P/N/M) electric control valve

ZAZ (P/N/M) electric control valve
  • sell：021-32051999
  • sell：021-32050777
  • fax：021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

ZAZP electric single-seat regulating valve, ZAZN electric double-seat regulating valve and ZAZM electric sleeve regulating valve are the executive units of DKZ electric unit combination instrument. It is one of the important links in the automatic regulating system of production process. It takes AC220V power supply voltage as the driving force, accepts the unified standard signal of 0~10mA DC or 4~20mA DC, and converts this into input. The signal corresponding to the upper and lower displacement, automatically control the valve, change the valve opening displacement, so as to achieve the process pipeline fluid medium such as pressure, flow, temperature, liquid level and other parameters of automatic control.


ZAZP, ZAZN and ZAZM electric control valves can be divided according to the mode of operation.


Positive action: electric closed open type (when the electrical signal increases when the valve position downward displacement), "B".


Reaction: electric open - normally closed (when the electrical signal increases when the valve position upward displacement), "K".


ZAZP, ZAZN, ZAZM electric control valves are widely used in chemical industry, petroleum, metallurgy, power plants, light textile, papermaking and pharmaceutical production process automation and remote control.


There are standard type, bellows sealed type, jacket insulation type and other varieties. Product pressure level has PN1.64.06.4 MPa; nominal diameter DN20-300 mm; applicable fluid temperature has - 40-450; according to the temperature of different valve cover can be divided into normal temperature type, high temperature type; flow characteristics have equal percentage (logarithmic) and linear.


ZAZP electric single-seat regulating valve is composed of DKZ straight-way electric actuator and straight-through low-flow resistance single-seat valve. It has only one seat and a plunger-shaped spool and has good sealing performance. The guiding part adopts (upper and lower double-guide or bushing top-guide) structure. It has the characteristics of large guiding area and strong anti-vibration performance, and is suitable for medium leakage. There are strict requirements for the quantity of the occasion, but due to the structural reasons of the valve, the unbalanced force on the stem is larger, especially in the nominal diameter of large conditions more obvious, so the valve is only suitable for the occasion of small pressure difference.


ZAZN electric double-seat regulating valve is composed of DKZ straight-way electric actuator and straight-through low flow resistance double-seat valve. The valve core is stable and reliable in the process of displacement. There are two seats and two plunger-shaped spools in the valve body. The fluid medium flows out through the upper and lower spool seat. It has large flow rate, large allowable pressure difference and small unbalanced force. A balanced double-seat valve is suitable for occasions where the medium is not very clean and the leakage requirement is not strict.


ZAZM electric sleeve regulating valve is composed of DKZ electric actuator and straight through low flow resistance balance sleeve valve. The spool adopts pressure balance spool. The spool is cylindrical. The spool is guided by the inner cylinder and the top of the sleeve. Therefore, the unbalanced force on the spool is very small, the operation is stable and the performance is good. It is a force balance regulating valve. When the pressure difference between the front and back ends is high, the vibration caused by the swirl impact is weakened because the spool is side-directed by the sleeve, so the valve has the advantages of low noise, small cavitation flashing effect, long service life and so on. But the leakage rate of the valve seat is slightly larger than that of the single seat valve.


Actuator of electric control valve


型號
DKZ-310/310C
DKZ-410/410C
DKZ-510/510C
推力N
4000
6400
16000
行程
10
16
25
30
18
30
40
60
30
50
60
100
全行程時間S
8
12.5
20
24
15
24
32
48
16
30
37
62


DKZ type direct stroke electric actuator can be used with DDZ-III type instrument, and can also be used with assembly instrument and TA instrument. It takes 220V power supply as power 4 20mmA. DC, converts this into the output shaft linear displacement corresponding to the input signal, automatically controls the control valve or other terminal mechanism to complete the automatic adjustment task, or matches. Electric operator realizes manual remote control.


The instrument has three control modes: continuous adjustment, manual control and in-situ manual operation. The automatic control system with DKZ straight stroke electric actuator needs to be equipped with ZPE-3101 servo amplifier, DFD-1000 electric actuator or manual operator to realize manual_automatic non-disturbance switching of the automatic control system.


Electric control valve performance index

項目
指標
基本誤差％
≤±5.0
回差％
≤3.0
死區％
≤3.0
泄漏量
單座閥
10-4×閥的額定容量
雙座閥
10-3×閥的額定容量
套筒閥
10-3×閥的額定容量
Allowable differential pressure of electric control valve
使用情況
閥芯處于流開狀態,關閉時閥后壓力P2＝0
公稱通徑
DN(mm)
閥座直徑
DN(mm)
執行機構
you效推力
(N)
允許壓差(MPa)
電動單座調節閥
PN1.6(MPa)
PN6.4(MPa)
20
10
12
15
20
400,1000,2500
公稱壓力
3.8
2.7
1.7
1.0
公稱壓力
4.3
2.5
25
26
400,1000,2500
0.5
公稱壓力
0.6
3.6
32
32
0.4
公稱壓力
0.4
2.3
40
40
400,1000
2500,6400
0.7
1.0
0.7
1.5
50
50
0.5
1.0
0.5
1.0
65
66
6400,16000
1.4
1.4
80
80
1.0
1.0
100
100
0.6
0.6
125
125
6400,16000
0.5
1.0
0.5
1.0
150
150
0.3
0.7
0.3
0.7
200
200
0.2
0.4
0.2
0.4
250
250
16000
0.3
0.3
300
300
0.2
0.2
Main parts material of electric control valve


材料代號
C(WCB)
P(304)
R(316)
主要
零件
閥體,閥蓋
WCB(ZG230-450)
ZG1Cr18Ni9Ti(304)
ZG1Cr18Ni12Mo2Ti(316)
閥芯,閥座
1Cr18Ni9Ti(304)或司鈦萊合金堆焊
1Cr18Ni9Ti(304)或司鈦萊合金堆焊
1Cr18Ni12Mo2Ti(316)或司鈦萊合金堆焊
閥桿
2Cr13
1Cr18Ni9Ti
1Cr18Ni12Mo2Ti
填料
V型聚四氟乙烯(F4),柔性石墨,不銹鋼波紋管
墊片
增強聚四氟乙烯 (F4),不銹鋼墊片,金屬石墨纏繞墊片
推桿,襯套
2Cr13
適用
工況
適用介質
水,蒸汽,油品類氣液體
硝酸堿類腐蝕性氣液體
醋酸類等腐蝕性氣液體
常溫型
-30～+250 F4:≤200℃
-40～+250 F4:≤200℃
-40～+250℃ F4:≤200℃
高溫型
-30～+450℃
-40～+450℃
-40～+450℃


Main technical parameters of electric control valve
公稱通徑mm
20
25
32
40
50
65
80
100
125
150
200
250
300
閥座直徑mm
20
25
32
40
50
65
80
100
125
150
200
250
300
額定流量
系數Kv
單座
5
8
12
20
32
50
80
120
200
280
450
800
1200
雙座
10
16
25
40
63
100
160
250
400
630
1000
1600
套筒
全量
15
35
50
125
190
400
630
0.6
9
20
30
75
115
240
350
額定行程L(mm)
10
16
25
40
60
100
執行器型號
DKZ-310
DKZ-310
DKZ-310
DKZ-410
DKZ-410/510
DKZ-510
出軸推力N?m
4000
4000
4000
6400
6400/16000
16000
全行程時間S
8
12.5
20
32
48/37
62
電源電壓
AC220V 50Hz
輸入信號
4～20mA DC 0～10mA DC
輸入阻抗
Ⅱ型:200Ω?、笮?250Ω
作用模式
電開式(K)型,電關式(B)型
流量特性
等百分比,直線,快開性
允許泄漏量(L/h)
單座≤10-4×閥額定容量；雙座≤10-3×額定容量；套筒:≤10-3×閥額定容量
固有可調比R
30:1
公稱壓力PN(MPa)
1.6 2.5 4.0 6.4

Main dimensions of electric control valve




Electric single seat regulating valve and electric double seat regulating valve

公稱通徑
DN
A×B
L
H
H1
ZAZP單座
ZAZN雙座
PN1.6
PN4.0
PN6.4
普通型
熱片型
普通型
熱片型
ZAZP
ZAZN
20
230×460
180
185
190
653
804
/
/
91
/
25
185
190
205
665
816
670
820
112
104
32
200
210
220
671
822
673
823
118
107
40
220
230
240
683
834
693
843
129
126
50
250
255
265
698
849
698
848
144
131
65
230×530
275
285
295
789
949
799
959
175
175
80
305
310
325
792
952
809
969
191
190
100
350
355
370
796
956
821
981
195
202
125
260×630
410
425
440
847
1062
872
1087
243
250
150
450
460
475
855
1070
882
1097
251
260
200
550
560
570
894
1109
924
1139
290
302
250
670
690
750
1156
1368
1156
1368
380
422
300
740
785
815
1215
1427
1215
1427
435
484
Electric single seat regulating valve and electric sleeve adjusting valve
公稱通徑
DN
L(mm)
A×B
H(mm)
H1(mm)
PN16
PN40
PN64
普通型
熱片型
25
185
200
210
230×460
668
819
75
40
220
235
251
684
835
95
50
254
267
286
684
835
98
80
295
317
337
230×530
785
946
130
100
350
368
394
795
946
156
150
450
473
508
260×630
945
1160
208
200
600
615
650
945
1160
250
250
650
670
690
1050
1320
265
300
740
770
800
1145
1380
295

The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards：

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service：

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service：

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service：

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.：

a、Structure length；

b、Connection Type；

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range；

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process：

1、Customer purchase list fax to021-33872143，Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google：

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.：

a、Structure length；

b、Connection Type；

c、Nominal diameter, full diameter, reduced diameter, pipe size；

d、Operating medium and temperature, pressure range；

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time.， The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service：

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service：

1、"Qigao" product quality period is from the factory12Month, practice“Three packs”Service (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.，
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.ZAZ (P/N/M) electric control valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!